A three-stage push switch: the first stage lights up (colorful lights: red, green, blue, yellow, cyan, purple, white, gradient color (a cycle of about 30 seconds))

1 levels of lighting music (6 music 5 natural sounds)

2 levels of voice control lights up.

A light touch switch, in the normal running state:

1  Push the system to the first gear, short press the touch switch and the light is on (lighting time is 3 minutes), press again to turn off the light

2  push the system to the 2nd gear, short press the tact switch and the light is on, and the music sounds (music is the first song by default), press the tact switch to switch to

3  music, sequence: music 1—music 2—music 3—music 4—music 5—music 6—natural sound 1—natural sound 2—natural sound 3—natural sound

4  Choose which music to play when the alarm time is up. Inaddition, the push system is in the 3rd gear as the voice control mode. In this mode, the light is only on when there is a sound trigger (lighting time is 30 seconds)

Alarm mode

When the alarm sounds, short press the touch switch to enter the 5-minute snooze. (Note; the duration of an alarm is about 30 to 45 minutes)

Specifications

Time and alarm settings:

1. Check the time; install 3 AA batteries according to the indicator in the battery box. Then follow the direction indicated by the arrow on the needle adjustment knob to rotate the hour and minute hands to the local standard time.

2. Alarm setting: According to the direction indicated by the arrow of the alarm knob, turn the alarm hand to the set alarm point and then turn the switch to the middle 2nd gear. When the pointer reaches the alarm point

The alarm will be automatically remembered. Turn the switch to gear 1 or gear 3 to turn off the alarm and turn on the corresponding function of gear 1 or 3.

Package Includes: Projection alarm clock (without battery).